EuroSMC PTE-IO-LOGIC Control Logic Simulator 

EuroSMC PTE-IO-LOGIC Control Logic Simulator

The equipment PTE-IOLogic responds to the need to simulate and analyze, in the field or in electrical installations, a logical control sequences for substations, industrial control systems, remote control SCADA systems, and especially in the field of protection relays. Increasing so is this importance, as all the modern numeric relays incorporate control logic in the actual relay. The PTE-IOLogic monitors input signals and can condition the output response to these.

The main problem presented with these types of tests, is to check that the correct sequences of events are achieved during commissioning tests. This requires that the entire control systems and devices operate correctly with the actual mechanisms and elements of the installation. Not only does this need to be checked once, but usually repeated until the adequate adjustments are found and made, with the implied difficulty of this. This reduces the possibility of an incorrect operation may lead to damage in the installation. For these reasons, an equipment, such as the PTE- IOLogic represents an enormous advantage, in terms of safety and time saved.

The equipment is designed to operate in harsh environments, as the PTE-IOLogic is mounted in a hermetic anti-shock case. It's reduced size and weights make it ideal for field use.

APPLICATIONS

- The application use of the of the PTE-IOLogic is extremely wide, given that it is capable of simulating any control situation, highlighting the following applications:
- Simulation and analysis of logic controls in protection relays.
- Simulation, analysis, and verification of the control system in substations.
- Simulation of any breaker system.
- Simulation and analysis of traffic control systems.
- Analysis of logical programs in automatic remote systems (SCADA)
- In general, to reproduce and to analyze any sequential programmed logic system.
- A system with these characteristics saves time and the possibility of damage in primary equipment especially during commissioning process. CHARACTERISTICS
- 16 Inputs in 8 groups galvanically isolated
- 8 isolated outputs
- Inputs and Outputs are configured with the software EURO-IOLog
- Dimensions: 150 x 340 x 300mm/5.4Kg. 6" x 13" x 12"/12 lbs.